spring cone crusher machine crushes materials by the working surface between the movable cone and fixed cone. During operation, the motor of spring cone crusher drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.Crusher
Archive for the ‘Crusher Machine’ Category
PY cone crusher machine benefits and features
1) spring cone crusher machine has high productivity and high quality.
2) spring cone crusher machine can do long time continuous work.
3) Easy maintenance and low cost.
The spring safety system of spring cone crusher acts as overloading protection system that allows metal to pass through the crushing chamber without damaging the cone crusher.
4) Unique crushing ability in primary, secondary and tertiary crushing.
Cone Crusher PYD-1200
Cone Crusher PYD-1200
While Cone Crusher working, the rotation of motor winds one regular place and fastens sports of putting by belt pulley or shaft coupling, drive shaft and cone being under the compelling movement, and then make the broken taper’s broken wall close and leave the firm white wall surface sometimes, make ore assault constantly broken, pinch and crooked function and then to make ore broken. When there are nobreak matters or overloads for a certain reason, spring insurance system will be used by itself, the arrange ore mouth will be increase, unusual matter will be discharged from broken, if unusual matter block,The Cone Crusher also can use system of clears, make the arrange ore increase constantly, and then make the unusual matter out. Under the function of the spring, the arrange ore mouth will reset automatically, the machine resumes normal. The Cone Crusher has three types of rough, moderate and careful, you can choose to purchase according to your requirement.
Feature Of Cone Crusher PYD-1200:
1) High reliability
2) Flexible capacity
3) Over-loading protection
Technical Data Of Cone Crusher PYD-1200:
Type:PYD-1200
Weight (T):25.3
Power (kw):130
Outside diameter Of crushing cone (mm):1200
Max Feeding (mm):50
The adjusting range of discharger (mm):3-15
Capacity (t/h):18-105
Cone Crusher
The Cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, gritstone, etc. Type of the crushing cavity is decided by the application of the ores. Standard type is for PYZ (secondary crush); middle type is for PYD (tertiary crush); short-head type is for primary and secondary crush.
Cone Crusher
The Cone Crusher Features:
1. high productivity; high quality
2. less machine stop time
3. easy maintenance and low cost
4. unique crushing ability in primary, secondary and tertiary crushing
The Cone Crusher Structure & operation principles:
The cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.
Working of the Cone Crusher:
The Cone crusher crushes materials by the working surface between the movable cone and fixed cone.The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Technical Data Of Cone Crusher:
| Type | Weight (T) | Power(kw) | Outside diameter Of crushing cone (mm) | MaxFeeding (mm) | The adjusting range of discharger (mm) | capacity(t/h) | |
| PYB | 600 | 5 | 30 | 600 | 65 | 12-25 | 20-40 |
| PYD | 5.5 | 600 | 35 | 2-13 | 12-23 | ||
| PYB | 900 | 11.2 | 55 | 900 | 115 | 15-50 | 60-105 |
| PYZ | 11.2 | 900 | 60 | 5-20 | 50-90 | ||
| PYD | 11.3 | 900 | 50 | 3-13 | 20-65 | ||
| PYB | 1200 | 24.7 | 130 | 1200 | 145 | 20-50 | 110-168 |
| PYZ | 25 | 1200 | 100 | 8-25 | 42-135 | ||
| PYD | 25.3 | 1200 | 50 | 3-15 | 18-105 | ||
| PYB | 1750 | 50.3 | 160 | 1700 | 215 | 25-50 | 280-480 |
| PYZ | 50.3 | 1700 | 185 | 10-30 | 115-320 | ||
| PYD | 50.2 | 1700 | 85 | 5-15 | 75-230 | ||
| PYB | 2200 | 80 | 260 280 |
2200 | 300 | 30-60 | 590-1000 |
| PYZ | 80 | 2200 | 230 | 10-30 | 200-580 | ||
| PYD | 81.4 | 2200 | 100 | 5-15 | 125-350 | ||